User Manual

44
Global Settings Table
Global Settings
Setting Selector Knob Position
Values
ALT/LEGACY LED Color
Description
Indicates the factory default value for each global setting.
Tempo
Preset/Global
VINTAGE DIGITAL DIGITAL
Set the behavior for the device’s Tap Tempo to be either per preset or global:
Per Preset (red)
— Tempo is saved and recalled individually, per preset.
Global (white)
— Tempo is applied globally to all presets. Choose this option if you prefer the tempo
does not change until you manually change it.
TAP
Footswitch
Assign
CRISSCROSS DIGITAL w/MOD
Configure the desired function for the TAP Footswitch:
Tap Tempo (red)
— Stomp the switch several times to "tap" in a tempo. The switch LED flashes red to
indicate the current tempo.
1 Switch Looper (white)
— Use the switch to access and control the 1 Switch Looper. The LED lights dim
white (see "Using the 1 Switch Looper" on page 23).
Expression Toggle
(blue)
— When configured to control a parameter, the switch toggles between two values,
emulating the "heel" and "toe" positions of an expression pedal controller. The LED
lights dim blue to indicate heel position, and bright blue for toe position.
Squeal (orange)
— Pressing and holding the switch momentarily sets the delay’s REPEATS parameter
to 100%, allowing you to get the infinite delay repeats effect on demand! Releasing
the switch returns the REPEATS to its previous setting. The switch LED lights dim
orange, and appears bright orange while held.
Preset DEF (yellow)
— Pressing the switch changes between the preset banks “ABC” (the LED lights dim
yellow) and “DEF” (the LED lights bright yellow).
Footswitch 5
Assign
EUCLIDEAN ECHO PLATTER
Configure the desired function for the optional Footswitch 5:
(Note that you’ll additionally need to configure the "EXP Pedal - FS 5/6 Jack Assign"
global setting as "FS 5/6" for a connected FS 5 to be functional.)
Tap Tempo (red)
— Stomp the switch several times to “tap” in a tempo.
Looper On/Off (white)
— Use the switch to toggle between the currently-loaded preset and the Classic
Looper.
Expression Toggle
(blue)
— When configured to control a parameter (such as Delay - Mix), the switch toggles
between two values, much like the "heel" and "toe" positions of an expression pedal
controller.
Squeal (orange)
— Pressing and holding the switch momentarily sets the delay’s REPEATS parameter
to 100%, allowing you to get the infinite delay repeats effect on demand! Releasing
the switch returns the REPEATS to its previous setting.