User Manual
Table Of Contents
- DL4 MkII Owner's Manual
- Welcome to DL4 MkII
- Quick Start
- Basic Operation
- Working with Presets
- Loading Presets A, B, and C
- Loading Presets D, E, and F
- Loading Presets 1 - 128 via MIDI
- Saving a Preset
- Restoring Factory Presets
- About Tap Tempo
- Configuring Delay and Reverb Routing
- Stereo vs. Mono Output
- Setting up an Expression Pedal and Footswitches
- Configuring One or More Parameters for Pedal Control
- Configuring Footswitch Control Options
- Controlling The Classic Looper Parameters
- Using a Microphone
- Using the Looper
- Effects Models
- Global Settings
- MIDI
- Additional Resources
45
Global Settings
Setting Selector Knob Position
Values
ALT/LEGACY LED Color
Description
Indicates the factory default value for each global setting.
Footswitch 6
Assign
DUAL DELAY STEREO
Configure the desired function for optional Footswitch 6:
Tap Tempo (red)
— Stomp the switch several times to “tap” in a tempo.
Looper On/Off (white)
— Use the switch to toggle between the currently-loaded preset and the Classic
Looper.
Expression Toggle
(blue)
— When configured to control a parameter (such as Delay - Mix), the switch toggles
between two values, much like the "heel" and "toe" positions of an expression pedal
controller.
Squeal (orange)
— Pressing and holding the switch momentarily sets the delay’s REPEATS parameter
to 100%, allowing you to get the infinite delay repeats effect on demand! Releasing
the switch returns the REPEATS to its previous setting.
N/A PITCH ECHO PING PONG
(Reserved for potential future Global Setting.)
Pedal Jack
Functionality
ADT REVERSE
Configure the EXP PEDAL - FS 5/6 jack for either pedal + switch or dual switch func-
tionality (see "Setting up an Expression Pedal and Footswitches" on page 14):
EXP Pedal Only
(red)
— Accommodates a single expression pedal, connected using a TS cable.
Single Footswitch
(white)
— Accommodates a single footswitch, connected using a TS cable. [The footswitch
triggers FS5]
EXP Pedal + Footswitch
(blue)
— Accommodates an expression pedal and a single footswitch, connected using a Y
cable (two TS to a TRS). [The footswitch triggers FS6]
Two Footswitches
(orange)
— Accommodates two footswitches, connected either as a dual footswitch using a
TRS cable, or two individual footswitches using a Y cable (to TS to a TRS). [FS5=Tip,
FS6=Ring]
EXP/Switch
Polarity
DUCKED DYNAMIC
Configure the +/- polarity for your connected EXP PEDAL and footswitches. If your
pedal or footswitch is controlling parameters backward, try changing this setting.
Normal (red)
— Pedal jack accommodates a Line 6 or Mission expression pedal.
Inverted (white)
— Pedal jack accommodates a Yamaha or similar expression pedal.
Note that this setting also inverts the polarity for Footswitches 5 and 6.