User Manual
Table Of Contents
- DL4 MkII Owner's Manual
- Welcome to DL4 MkII
- Quick Start
- Basic Operation
- Working with Presets
- Loading Presets A, B, and C
- Loading Presets D, E, and F
- Loading Presets 1 - 128 via MIDI
- Saving a Preset
- Restoring Factory Presets
- About Tap Tempo
- Configuring Delay and Reverb Routing
- Stereo vs. Mono Output
- Setting up an Expression Pedal and Footswitches
- Configuring One or More Parameters for Pedal Control
- Configuring Footswitch Control Options
- Controlling The Classic Looper Parameters
- Using a Microphone
- Using the Looper
- Effects Models
- Global Settings
- MIDI
- Additional Resources
47
Global Settings
Setting Selector Knob Position
Values
ALT/LEGACY LED Color
Description
Indicates the factory default value for each global setting.
Bypass Trails TAPE ECHO TRANSISTOR
Set whether the "trails" of your current delay and reverb effects are heard when you
bypass DL4 MkII:
Off (red)
— The delay and/or reverb’s trails are abruptly muted when you press the active A, B,
or C preset footswitch to bypass DL4 MkII.
On (white)
— The current delay and/or reverb trails decay naturally when you press the active
preset footswitch to bypass DL4 MkII.
Bypass Type MULTI-HEAD COSMOS
Select your preferred Bypass behavior for DL4 MkII (also see "What Type of Bypass?"
on page 11):
True (red)
— Your input signal continues to be sent directly through DL4 MkII with no A/D/A
conversion, and all DSP is bypassed. (MIC IN is muted when bypassed in this mode.)
Buffered (white)
[Bypass Trails on]
— Your input continues to be sent directly through DL4 MkII with no A/D/A conver-
sion, its signal to the DSP is muted, and the DSP’s existing delay/reverb trails are
allowed to decay naturally.
DSP (blue)
[Bypass Trails On]
— Your input is sent through the DSP path along with delay/reverb, but any further
delay/reverb processing is bypassed. Any existing delay/reverb trails are allowed to
decay naturally.
Dry Kill (orange)
[Bypass Trails on]
— All input is completely muted, but the DSP’s echoes decay naturally.
MIDI Channel SWEEP MULTI PASS
Choose the MIDI Channel the DL4 MkII uses for MIDI In and Out.
Channel 1 (red)
Channel 2 (white)
Channel 3 (blue)
Channel 4 (orange)
Assigned based on next
received PC message
(yellow)
Once the ALT/LEGACY button is set to yellow, DL4 MkII will listen for a Program
Change message sent on any MIDI Channel 1 - 16. DL4 MkII will then “learn” the
received MIDI Channel and set it as the new MIDI Channel for sending and receiving.
MIDI THRU ANALOG ADRIATIC
Choose whether DL4 MkII’s MIDI THRU is active or not:
Off (red)
Does not send incoming MIDI messages out the MIDI OUT/THRU or USB MIDI ports.
On (white)
Sends incoming MIDI messages out the MIDI OUT/THRU and USB MIDI ports.