User Manual

51
Controlling Parameters
If you really want to get into some serious real-time, remote control, MIDI CCs are the ticket! Configure your MIDI controller device to send the following CCs to DL4 MkII, and the
corresponding parameters will respond accordingly. As indicated in the following table’s Device Responds In: titled column, the device will respond to some MIDI commands only
while in Preset Mode, only in Classic Looper mode, or in both modes.
Parameter Control - MIDI CC Messages
CC Parameter or Function CC Value Device Responds In:
CC1 Delay Model Select
MkII Delays:
0 = Vintage Digital
1 = Crisscross
2 = Euclidean
3 = Dual Delay
4 = Pitch Echo
5 = ADT
6 = Ducked
7 = Harmony
8 = Heliosphere
9 = Transistor
10 = Cosmos
11 = Multi Pass
12 = Adriatic
13 = Elephant Man
14 = Glitch
Legacy Delays:
15 = Digital
16 = Digital w/ Mod
17 = Echo Platter
18 = Stereo
19 = Ping Pong
20 = Reverse
21 = Dynamic
22 = Auto-Vol
23 = Tube Echo
24 = Tape Echo
25 = Multi-Head
26 = Sweep
27 = Analog
28 = Analog Mod
29 = Lo Res Delay
Preset mode
CC2 Reverb Model Select
Reverbs:
0 = Room
1 = Searchlights
2 = Particle Verb
3 = Double Tank
4 = Octo
5 = Tile
6 = Ducking
7 = Plateaux
8 = Cave
9 = Plate
10 = Ganymede
11 = Chamber
12 = Hot Springs
13 = Hall
14 = Glitz
15 = Reverb Off
Preset mode
CC3 Emulates expression pedal 0-127 Preset and Classic Looper modes
CC4
Preset Bypass
(same as pressing the active preset switch)
0-63: Enables preset (Bypass Off);
64-127: Bypasses preset (Bypass On)
Preset mode
CC9 Classic Looper Mode On/Off
0-63: Classic Looper mode Off;
64-127: Classic Looper mode On
Preset and Classic Looper modes