User Manual
Table Of Contents
- DL4 MkII Owner's Manual
- Welcome to DL4 MkII
- Quick Start
- Basic Operation
- Working with Presets
- Loading Presets A, B, and C
- Loading Presets D, E, and F
- Loading Presets 1 - 128 via MIDI
- Saving a Preset
- Restoring Factory Presets
- About Tap Tempo
- Configuring Delay and Reverb Routing
- Stereo vs. Mono Output
- Setting up an Expression Pedal and Footswitches
- Configuring One or More Parameters for Pedal Control
- Configuring Footswitch Control Options
- Controlling The Classic Looper Parameters
- Using a Microphone
- Using the Looper
- Effects Models
- Global Settings
- MIDI
- Additional Resources
54
Additional Resources
Product Specifications
DL4 MkII Specifications
Delays 30
Reverbs 15
Looper Yes, with both a 4-Switch and 1-Switch Looper user interface
Mono/Stereo Mono or stereo input and output
USB USB-C port - for potential future firmware updates and USB
MIDI control via computer
SD Card 1 x microSD card slot - for expanded Looper memory
Audio Inputs 2 x 1/4" unbalanced Left (mono) and Right, Instrument level,
Impedance = 1 MΩ, Max input level = +11.25 dBu (8Vpp)
1 x XLR Mic In, with preamp
Audio Outputs 2 x 1/4" unbalanced Left (mono) and Right, Instrument level,
Impedance = 100 Ohms
MIDI MIDI 5-pin IN and OUT/THRU
USB MIDI In and OUT/THRU - for use via computer applications
Power
Requirements
9VDC, 500mA, center pin negative, 2.1 mm. It is recommended
to use the included Line 6 DC-1g power adapter
Dimensions
(H x W x D)
2 x 9.25 x 4.5 inches / 5.1 x 23.5 x 11.4 cm
Weight 2.03 lbs. / .92 kg
Online Resources
Looking for more info? We’ve got plenty of online resources, just a click away:
• See our DL4 MkII tutorial videos at line6.com/meet-dl4mkii.
• Download additional Help documentation covering DL4 MkII and all other Line
6 gear at Line 6 Product Manuals
•
Check out the Line 6 Support page for access to helpful tips, videos, discussion
forums, or to contact Line 6 Technical Support
• Can’t get enough Line 6 Gear & accessories? Head on over to the Line 6 Store