User Manual

1. MODEL SELECTOR - This is where you pick the model you want to use; it comes up pre-set to a great sound.
2. FREQ - Typically sets the frequency of your filter or synth model. Check the filter model descriptions for more details.
3. Q - Typically sets the width of your filter. Check the filter model descriptions for more details.
4. SPEED - Check the filter model descriptions for more details.
5 MODE - Check the filter model descriptions for more details.
6. MIX - This knob is always used to set the mix between the dry/direct/unprocessed signal and the processed signal. Turn counterclockwise for more dry signal.
7. STOMP SWITCHES - These switches choose one of the 4 memories. Step on a switch to get the sound that was stored there. To change what’s in a memory, hold one
of these switches for 3 seconds: that will store whatever sound you are currently hearing, so you can recall it by pressing that switch.
SYNTH TIP: Like all monophonic guitar synths, the Filter Modeler synth models will track best with neck pickups, palm muting, and single note lines.
1
2
3 4 65
7