User Manual
Table Of Contents
- HX Stomp XL 3.0 Owner's Manual
- Welcome to HX Stomp XL
- Quick Start
- Play View
- Edit View
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Bypassing HX Stomp XL Completely
- Choosing a Block’s Model
- Moving Blocks
- Copying/Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Adding a Block to Favorites
- Saving a Model’s Default Settings
- Saving/Naming a Preset
- Creating /Restoring Full Device Backups
- Serial vs. Parallel Routing
- Setting Path B’s Output
- TAP Tempo
- The Tuner
- Dynamic DSP
- Block Order and Stereo Imaging
- The Blocks
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
- Additional Resources
13
Preset List
HX Stomp XL stores 32 banks of four presets (A, B, C, and D) for a total of 128 presets.
1. If not already there, press VIEW to select Play view.
2. Press the Upper Knob to open the Preset list:
16A
16B
16C
16D
DIR:Sultans
DIR:Heartbreaker
DIR:Hangar 19
DIR:Gosary
Reorder
Preset
Snapshot
PC:061
CC69:000
1
Turn the Upper Knob to select a preset.
Turn Knob 1 (Reorder Preset) to move the selected preset up and down the
list.
Turn Knob 2 (Snapshot) to select Snapshot 1, 2, 3, or 4 without having to be
in Snapshot footswitch mode. See “Snapshots” for more information.
TIP: The grayed-out numbers above Knob 3 represent the messages
required to recall the current preset (PC:XXX) and snapshot (CC69:XXX) from
an external MIDI controller or sequencing software.
Preset Footswitch Mode
Use the Play view’s Preset mode to navigate presets.
1. If not already there, press the MODE footswitch to select
Preset mode.
The left two switches display the currently-selected Up/Down switches’ function—
Bank, Preset, or Snapshot—accessed via the Global Settings > Footswitches >
Up/Down Switches—see page 58. The A, B, C, and D switches display the
currently-selected bank’s presets. The active preset’s label appears with a white
background, and its footswitch appears with a red LED ring:
01A
FX:Stereo Swirl
1
01A
FX:Stereo
Swirl
01C
FX:Bloomin’
BANK
01B
FX:80’s
Craze
01D
FX:Mod
Squad
BANK
EDIT / EXIT
TUNER
TAP
MODE
B
D
A
C
2. Press BANK or BANK to choose the desired bank.
Thepresetlabelsash,indicatingoneisreadytobeselected.
3. Press one of the four preset switches to load the preset.
TIPS: Press and release both and simultaneously to momentarily change
to Snapshot selection.
Press and hold both and simultaneously to change between Bank, Preset,
and Snapshot modes.