User Manual

19
Copying/Pasting a Block
Blocks can be copied and then pasted onto either another block location, or into an
entirelydierentpreset.
1. From Edit view, select the block you wish to copy and press
ACTION.
2. Press Knob 2 (Copy Block).
3. Select the location you wish to paste the block—even in a
location within dierent preset—and press ACTION.
4. Press Knob 3 (Paste Block).
NOTE: Inputs, Outputs, Splits, Mixers, and Loopers can also be copied and pasted,
where permitted. If you, for example, try pasting the Looper into the Split block’s
location, Knob 2 (Paste Block) will be grayed out. Furthermore, if the destination
presetcannotaccommodatethecopiedblock,theheaderwillbrieyread“DSP
full!” See “Dynamic DSP”.
Copy
Block
Path
Paste
Block
DSP full!
A
Clearing a Block
1. From Edit view, select the block you wish to clear and press
ACTION.
2. Press PAGE and press Knob 1 (Clear Block).
Clearing All Blocks
Clearingallblocksremovesallprocessingblocksandresetsthesignalowtoserial.It
doesnotaecttheInputandOutputblocks.
1. Press ACTION.
2. Press PAGE and press Knob 2 (Clear All Blocks).
The following dialog appears:
OKCancel
Clear all blocks?
3. Press Knob 3 (OK).
TIP: To retain your changes, remember to Save after making edits, and before
switchingtoadierentpreset(seenextsection).Onceapresetchangeismade,
all edited settings in an unsaved preset are discarded.
Adding a Block to Favorites
Onceyou’vedialedinanamporeectsblockexactlythewayyoulikeit,youcansave
it as a “Favorite” so the block can be added very quickly to other tones, complete
with your stored parameter settings and customized bypass assignment (excluding any
existing controller and snapshot assignments).
Favorites appear in the model menu’s “Favorites” category and can be renamed,
reordered, and cleared. You can add up to 128 Favorites.
NOTE:Ifyoudon’twantaFavoritetoberecalledwithaxedbypassassignment,
add the block to Favorites before creating a custom bypass assignment.
Input, Output, Split, and Merge Mixer block types cannot be added to Favorites.
1. From the Edit view screen, choose one of your preferred amps
or eects and tweak it exactly how you like it, with or without
footswitch and controller assignments.