User Manual
Table Of Contents
- HX Stomp XL 3.0 Owner's Manual
- Welcome to HX Stomp XL
- Quick Start
- Play View
- Edit View
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Bypassing HX Stomp XL Completely
- Choosing a Block’s Model
- Moving Blocks
- Copying/Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Adding a Block to Favorites
- Saving a Model’s Default Settings
- Saving/Naming a Preset
- Creating /Restoring Full Device Backups
- Serial vs. Parallel Routing
- Setting Path B’s Output
- TAP Tempo
- The Tuner
- Dynamic DSP
- Block Order and Stereo Imaging
- The Blocks
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
- Additional Resources
22
In the preceding illustration:
Our guitar signal goes into the purple Pitch, Amp, IR, and Modulation blocks, and
then is split to path A (upper) and path B (lower).
Stereo path A (upper) is sent to the dark orange Reverb block and stereo path B
(lower) is sent to the green Delay block.
Stereo paths A and B are merged together and sent to the Output.
3. Press ACTION again to drop the Delay block.
To remove path B, return all blocks that reside on path B (lower)
to path A (upper).
Setting Path B’s Output
There may be situations where you want parallel path B to be sent to a completely
dierentsetofoutputs.
1. From Edit view, turn the Upper Knob to select the point where
the two paths merge.
The Mixer block appears only when selected:
2. Press ACTION and turn Knob 1 (Path) to select “B.”
The Mixer moves to path B, and a new Output block is created. In this case, path
A is being sent from the HX Stomp XL Main L/R outputs, and path B is being sent
from its stereo Send L/R output:
3. Press ACTION again to drop the Mixer block.
TAP Tempo
Press the TAP/TUNER switch repeatedly to set the tempo in BPM
(Beats Per Minute).
Certain Delay and Modulation parameters such as Time and Speed can be represented
withxednumericvalues(msor Hz) ornotevalues(1/4-note,dotted1/8-note, etc.).
When set to note values, the parameter will follow Tap Tempo or incoming MIDI clock.
Press the parameter knob to toggle between ms (or Hz) and note values.
Harmony Delay
FeedbkTime
37%
Key
C1/4
Harmony Delay
FeedbkTime
37%
Key
C750 ms
MANUAL TIME/SPEED TAP/MIDI CLOCK TEMPO
NOTE: The HX Stomp XL device
does not respond to pressing TAP at tempi lower
than 40.0 BPM to ensure that multiple fast tap entries are recognized properly. You
may still manually select a tempo as low as 20.0 BPM using the Global Settings or
Knob 3 BPM parameter options described below.
The current tempo can also be set from “Global Settings > MIDI/Tempo”.
SHORTCUT: Touch the TAP/TUNER switch to briey display Tempo
parameters.
Tempo
Preset
BPM
120.0
Tempo
Knob Parameter Description
2 Tempo
Choose whether the tempo is stored and recalled with each
snapshot, recalled with each preset, or is applied globally
across all presets and snapshots.
3 BPM
Depending on the Knob 2 (Tempo) setting, this Beats Per
Minute value is saved per snapshot, per preset, or globally.