User Manual
Table Of Contents
- HX Stomp XL 3.0 Owner's Manual
- Welcome to HX Stomp XL
- Quick Start
- Play View
- Edit View
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Bypassing HX Stomp XL Completely
- Choosing a Block’s Model
- Moving Blocks
- Copying/Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Adding a Block to Favorites
- Saving a Model’s Default Settings
- Saving/Naming a Preset
- Creating /Restoring Full Device Backups
- Serial vs. Parallel Routing
- Setting Path B’s Output
- TAP Tempo
- The Tuner
- Dynamic DSP
- Block Order and Stereo Imaging
- The Blocks
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
- Additional Resources
26
Output Settings
Knob Parameter Description
1 Pan
Sets the balance between the left and right outputs. If you’re
only running the L/MONO output, leave this set to Center.
2
Level
Sets the overall level of the entire preset.
3
Type (Send
only)
Determines whether the Send L/R Output (appears when the
Mixer block is routed to Path B) is mono or stereo.
TIP: Output blocks include a built-in signal present/clip indicator—see next
section.
Signal Present and Clip Indicators
For path Input and Output blocks-Theseblocksdisplaywithagreenlltoindicate
asignalispresentandaredllifthesignalistoohot.Ifclippingisindicated,reduce
the signal level before and/or at the red indicated Input/Output block, as shown below.
Normal
Clipping
INPUT MAIN L/R INPUT RETURN L/R INPUT USB 5/6
Normal
Clipping
OUTPUT MAIN L/R
OUTPUT MAIN L/R
OUTPUT SEND L/R
OUTPUT SEND L/R
For Send/Return - Send, Return, and FX Loop blocks - Whenever the signal level
atanyoftheseblocktypesistoohot,aredllcolorisdisplayedasaclipindicator.If
clipping is indicated, you should reduce the signal level preceding the red indicated
block and/or at the red indicated Send/Return block.
Clipping
SEND/RETURN
BLOCK
Effects
HX Stomp XLhas allthe eectsof the Line6 award-winningHelixguitar processor.
TheseeectsarefoundwithintheMonoandStereosubcategoriesofthemodellist.In
addition, HX Stomp XLincludesselectedeectsfromtheclassicLine6DL4™,DM4™,
MM4™, and FM4™ stompboxes, as well as M13
®
, M9
®
, and M5
®
processors;these
appear in the Legacy subcategory.
MONO STEREO LEGACY
Courtesan Flange
7.1 5.34.3
Courtesan Flange
7.1 5.34.3
Analog Flanger
33% 88%0.055Hz
From Edit view, turn the Upper Knob to select the desired block
and then turn the Lower Knob to change its model, or press the
Lower Knob to enter the Model menu.
TIP: The Favorites category that appears at the start of the Model menu is initially
empty, awaiting you to add your preferred models to it—see page 19.
Distortion Models
Model Subcategories Based On*
Kinky Boost
Mono, Stereo Xotic
®
EP Booster
Deranged Master
Mono, Stereo Dallas Rangemaster Treble Booster
Minotaur
Mono, Stereo Klon
®
Centaur
Teemah!
Mono, Stereo Paul Cochrane Timmy
®
Overdrive
Heir Apparent
Mono, Stereo Analogman Prince of Tone
Tone Sovereign
Mono, Stereo Analogman King of Tone
Alpaca Rogue
Mono, Stereo Way Huge
®
Red Llama (modded)
Compulsive Drive
Mono, Stereo Fulltone
®
OCD
Dhyana Drive
Mono, Stereo Hermida Zendrive
Horizon Drive
Mono, Stereo Horizon Precision Drive
Valve Driver
Mono, Stereo Chandler Tube Driver
Top Secret OD
Mono, Stereo DOD
®
OD-250
Scream 808
Mono, Stereo Ibanez
®
TS808 Tube Screamer
®
Hedgehog D9
Mono, Stereo MAXON
®
SD9 Sonic Distortion
Stupor OD
Mono, Stereo BOSS
®
SD-1 Overdrive
Deez One Vintage
Mono, Stereo BOSS DS-1 Distortion (Made-in-Japan)
Deez One Mod
Mono, Stereo BOSS DS-1 Distortion (Keeley modded)
*See “U.S. Registered Trademarks” on page 41.AllproductnamesusedinthisdocumentaretrademarksoftheirrespectiveownersandneitherYamahaGuitarGroupnorLine6areassociatedoraliatedwiththem.
These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.