User Manual

37
Impulse Response Settings
Page Knob Parameter Description
1
1 IR Sel
Selects one of the 128 available IR index locations. If a
location contains an IR, its name appears in the inspector
header.
2 Low Cut
Filters a portion of the IR’s bass and/or treble
frequencies, which can help remove rumble and/or high-
end harshness.
3 Hi Cut
2
1 Mix
Blends the IR signal with the dry signal passed through
the IR block. When set to 0%, the path bypasses the
IR completely. When set to 100%, the entire path is fed
through the IR, and no dry signal is heard.
2 Level
Adjusts the overall output level of the IR block.
IR File Reference
OnceanIRblockisconguredtoutilizeanIRindexslotthatincludesanimportedIR
(.wavor.hir)le,andthepresetthensaved,thepresetcreatesa“referencesignature”to
theimportedIRfromitslename.Likewise,ifyousaveyourIRblockasaFavorite(see
page 19) or set the IR block’s current settings as the User Model Defaults (see page
20),theIR bockalso createsareferenceto thespecicIR lewithin yourIRlibrary.
Therefore, if you re-order IRs within the IR library list, your preset (or IR Favorite or User
ModelDefaultblock)willstillintelligentlyreferencetheoriginallyassociatedIRle,even
ifitnowresidesinadierentIRLibraryindexlocation.Thisalsomakesiteasytoshare
yourpresetswithfriendssincetheycantheninsertthesameIRleinanyslotwithintheir
device’sIRlibrary,andthepresetwillndit.PleasealsorefertotheHX Edit Pilot’s Guide
for additional info regarding the use of IRs.
Send/Return
Each of the sends and returns can be used independently or used together as a (mono
or stereo) FX loop.
FXloopsletyoudynamicallyinsertyourfavoriteexternalstompboxes(orrackeects)
into any location in your preset.
NOTE: Each send and return pair can be set for instrument (for inserting
stompboxes) or line-level operation. See “Global Settings > Ins/Outs”. Send/
Returnblocksalsooerclipindicatorsforlevelmanagement—seepage 26.
Send Settings
Knob Parameter Description
1 Send
Adjusts the level sent to your external devices.
2 Dry Thru
Adjusts the level of the signal passed through the Send block,
independent of the Knob 1 (Send) level. Normally, this should be
set to 0.0dB.
Return Settings
Knob Parameter Description
1 Return
Adjusts the level received at the Return jack.
2 Mix
Blends the Return signal vs. the dry signal passed through the
Return block. When set to 0%, the path bypasses the Return
completely. When set to 100%, the entire signal is fed from the
Return, and no dry thru signal is heard.
FX Loop Settings
Page Knob Parameter Description
1
1 Send
Adjusts the level sent to your external device.
2 Return
Adjusts the level received at the Return jack.
3 Mix
Blends the FX loop signal vs. the dry signal passed
through the FX Loop block. When set to 0%, the path
bypasses the FX loop completely. When set to 100%, the
entire path is fed through the FX loop, and no dry thru
signal is heard.
This means that, if you don’t currently have your external
gear connected to the Send & Return jacks, you won’t
hear any output signal unless you bypass the FX Loop
block!
2 1 Trails
Trails O: An external stompbox would be instantly
muted when the FX Loop block is bypassed. Trails On:
An external delay or reverb stompbox would continue to
decay naturally when the FX Loop block is bypassed, or
adierentsnapshotisselected.