User Manual

51
CC Toggle
Page Knob Parameter Description
1
2
MIDI
Channel
Sets the CC messages’ MIDI channel (1-16). When set
to “Base,” the HX Eects device follows the Global
MIDI channel, which is set from the “Global Settings >
MIDI/Tempo” page.
3 CC #
Sets the CC number (0-127).
2
1 Dim Value
Sets the CC number’s value (0-127) when the
footswitch ring is dim.
2 Lit Value
Sets the CC number’s value (0-127) when the
footswitch ring is lit.
3 Type
Sets the footswitch behavior as either “Latching” (the
default) or “Momentary.”
NOTE: For CC Toggle commands, one of two values is automatically
transmitted upon preset recall, determined by the footswitch’s state (dim or
lit) when the preset was saved. Subsequent presses of the footswitch toggle
between the two states’ CC values—Dim Value and Lit Value.
Bank/Prog (Program Change)
Page Knob Parameter Description
1
2
MIDI
Channel
Sets the Bank/Program message’s MIDI channel (1-
16).Whensetto“Base,”theHXEectsdevicefollows
the Global MIDI channel, which is set from the “Global
Settings > MIDI/Tempo” page.
3
Bank
CC00
SetstheCC#00(BankMSB)value.Select“O”ifthe
receiving device shouldn’t respond to Bank MSB.
2
1
Bank
CC32
SetstheCC#32(BankLSB)value.Select“O”ifthe
receiving device shouldn’t respond to Bank LSB.
2 Program
SetstheProgramChange(PC)value.Select “O”if
you only want to send a Bank MSB and/or Bank LSB
message.
Note On
Page Knob Parameter Description
1
2 MIDI Ch
Sets the note’s MIDI channel (1-16). When set to
“Base,”theHXEectsdevicefollowstheGlobalMIDI
channel, which is set from the “Global Settings >
MIDI/Tempo” page.
3 Note
Sets the MIDI note value (C-1 ~ G9). Middle C is C3.
Note On
Page Knob Parameter Description
2
1 Velcity
Sets the MIDI note’s velocity (0-127).
2 Note O
Determines whether the MIDI note sustains until
pressing the switch again (Latching) or sustains only
while the switch is held (Momentary).
MMC (MIDI Machine Control)
Knob Parameter Description
2 Message
Determines the message type.
QWERTY Hotkey Commands
QWERTY hotkeys (computer keyboard shortcuts with or without modiers, such as
Shift, Control, Option/Alt, and Command) can also be sent to your Mac, PC, or iOS
device via USB, allowing you to control virtually any DAWs, YouTube, Spotify, looping
software, DJ software, media players, lighting software, and more!
QWERTY command assignments can be made to any footswitch or any Instant
command, allowing them to be sent automatically from any preset or snapshot recall.
These commands can be assigned on HX Stomp XL using the preceding steps within
thischapter(butyou’lllikelynditfasterandeasierusingtheHXEditapp).
Just like a standard computer keyboard, hotkeys won’t work unless the software
or app you want to control is in focus.
QWERTY Hotkey
Page Knob Parameter Description
1
2 Modier 1
Set up to three key modier(s) to be sent with
the keystroke: Choose Shift, Alt, Ctrl, or Mac/PC
(corresponds to the “Windows” key on Windows OS
systems, and the “Command” key on macOS systems.
Choose“None” for Modier1, 2,or 3for noadded
modier.
3 Modier 2
2
1 Modier 3
2 Keystroke
Sets the alpha, numeric, or other computer keyboard
keystroke value to be sent.
3 Type
Sets the footswitch type to either Momentary or
Latching.