User Manual
Table Of Contents
- HX Stomp XL 3.0 Owner's Manual
- Welcome to HX Stomp XL
- Quick Start
- Play View
- Edit View
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Bypassing HX Stomp XL Completely
- Choosing a Block’s Model
- Moving Blocks
- Copying/Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Adding a Block to Favorites
- Saving a Model’s Default Settings
- Saving/Naming a Preset
- Creating /Restoring Full Device Backups
- Serial vs. Parallel Routing
- Setting Path B’s Output
- TAP Tempo
- The Tuner
- Dynamic DSP
- Block Order and Stereo Imaging
- The Blocks
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
- Additional Resources
54
Global EQ
The Global EQ built into HX Stomp XL has three fully parametric bands plus variable
lowandhighcutlters,andisusedforcompensatingforthewidedisparityinacoustic
environments on tour or when traveling from studio to studio. Global EQ is applied to
all presets.
NOTE: Global EQ is never heard from the USB outputs.
1. Press PAGE and PAGE together to open the Menu.
2. Press PAGE and then Knob 1 (Global EQ).
The Global EQ screen appears:
Global EQ
0.7 0.0 dB110 Hz
QFreq Gain
Global EQ
0.7 0.0 dB110 Hz
Low
QFreq Gain
Low
GLOBAL EQ OFF GLOBAL EQ ON
3. Press the Upper Knob to turn Global EQ on and o.
4. Turn the Upper Knob to select the desired EQ band—Low Cut,
Low, Mid, High, or High Cut.
5. Turn Knobs 1-3 to adjust the selected EQ band.
Resetting Global EQ
ResettingtheGlobalEQreturnsitssettingstofactorydefault(at).
1. From the Global EQ screen, press ACTION.
2. Press Knob 1 (Reset EQ).
The following dialog appears:
OKCancel
Reset Global EQ?
3. Press Knob 3 (OK).