User Manual

56
Global Settings > Ins/Outs
Page Knob Parameter Description
1
1 Input Level
Choose “Inst[rument]” when connecting a guitar, bass, or stompboxes to HX Stomp XL’sinputjack(s);choose“Line”whenconnectingsynths,drum
machines, the sends from mixers, or other line-level sources. If your guitar or bass has really loud active pickups (or if you just happen to prefer the
sound of a “padded” input level for your instrument), choose “Line” - Or, just try both and trust your ears.
2 Output Level
Choose“Inst[rument]”whenconnectingthe1/4"outputstostompboxesorthefrontofguitaramps;choose“Line”whenconnectingtomixersor
standalone recorders. When using a single amp or mixer channel, connect only the LEFT/MONO 1/4" jack.
3 Send/ReturnL
Choose“Inst[rument]”whenusingaSend/ReturnpairasanFXloopforstompboxes;choose“Line”whenusingaSend/ReturnpairasanFXloopfor
line-level rack processors or as additional inputs and outputs for connecting keyboards, drum machines, mixers, and other gear.
2
1 Send/ReturnR
2 Return Type
Determines whether the signal received at the Return jacks should be used for Return and FX Loop blocks—or—act as a stereo Aux In (no
processing) for jamming along with mixers, MP3 players, etc. To utilize the Return jacks for an unprocessed Aux In, set the preset’s Input block to
“Main L/R” - this allows your instrument signal (connected via the Main L/R input) to be heard simultaneously along with the (unprocessed) Return
L/R signal for jamming along.
3 USB In 1/2 Trim
Sets the level of incoming audio from USB 1/2, which bypasses all HX Stomp XL processing. Normally, this should be left at 0.0dB.
3
1 Phones Monitor
Determines which signal(s) are heard from the Phones output. Normally you would set this to “Main L/R.”
2
Volume
Controls
Determines whether the VOLUME knob controls both the 1/4" main output and headphone output (“Main+HP”) or just the headphone output
(“Phones”). When set to “Phones” the 1/4" main outputs remain at unity gain.