User Manual

57
Global Settings > Preferences
Page Knob Parameter Description
1
1 Bypass Type
When pressing the Upper and Lower knobs together (or a footswitch assigned to “All Bypass”), HX Stomp XL bypasses all blocks. There are two types of All
Bypass in HX Stomp XL—Choose “Analog” if you want your guitar’s signal routed directly from the HX Stomp XL inputs to its outputs, with no processing or
A/D/A conversion (also called “true bypass”). Choose “DSP” if you want delay echoes and reverb tails to decay naturally when HX Stomp XL is bypassed.
TIP:YoucanalsousetheGlobalSettings>Footswitches>“TAPFunction”conguretheTAPswitchtotoggleBypasson/o.
2 Snapsht Edits
Determineswhetheranyeditsmadetoasnapshot(blockon/o,parametercontrol,tempo)arerememberedwhenreturningtothatsnapshot.When
set to “Recall,” any snapshot edits are recalled when jumping from snapshot to snapshot and appear as you last left them. When set to “Discard,” any
snapshot edits are discarded when jumping from snapshot to snapshot and appear as the preset was last saved. If you want to save changes made to
a snapshot while Snapshot Edits is set to “Discard,” press SAVE twice before selecting another. See “Determining Snapshot Edit Behavior”.
3 Tempo Pitch
DetermineshowdelayrepeatsbehavewhenrepeatedlypressingTAP.“Authentc”[Authentic]respectsthenaturalpitchuctuationsinherentwhenchanginga
realdelaypedal’stimeknob;“Transpr”[Transparent]minimizestheseartifacts.
2
1 EXP/FS Tip
Determines whether the rear panel PEDAL jack’s Tip signal is an Expression Pedal 1 input jack or a Footswitch 7 input jack. (Also, see the “FS 7
Function” parameter in the following Footswitches table.)
2 EXP/FS Ring
Determines whether the rear panel PEDAL jack’s Ring signal is an Expression Pedal 2 input jack or a Footswitch 8 input jack. (Also, see the “FS 8
Function” parameter in the following Footswitches table.)
3 Tip Polarity
If your external expression pedal or footswitch appears to work backward—for example, a Volume pedal block is loudest with the heel all the way
down, or if your FS7 or FS8 assigned function is not performing as expected when toggled via your external footswitch—set its polarity to “Invert.”
3
1 Ring Polarity
2
Preset
Number
Determines whether presets appear as 32 banks of four (“01A - 32D”) or are numbered “000-127” (convenient when recalling presets via MIDI program
change messages).
3
Snapshot
Reselect
Determines the behavior when pressing a Snapshot mode footswitch again after loading its assigned snapshot. “Reload” (the default) simply reloads
the stored state of the footswitch’s assigned snapshot again. “Toggle Previous” toggles between loading the previously selected snapshot and the
footswitch’s assigned snapshot.
4 1
Auto
In-Z
Determines how the input’s impedance circuit behaves when the Input block > Input Main L/R > In-Z is set to “Auto.” When set to “First” (the
default),theimpedancecircuitreectstherstblock’simpedancewithinthesignalpath,regardlessofwhetherit’senabledorbypassed.Whensetto
“Enabled,”theimpedancecircuitreectstheimpedanceoftherstenabledblockinthesignalpath. Also, see “Input Settings” on page 25.