User Manual

60
Global Settings > MIDI/Tempo
Page Knob Parameter Description
1
1
MIDI Base
Channel
Sets the system base MIDI channel that HX Stomp XL uses to both send and receive MIDI communication via MIDI and USB.
2 MIDI Thru
Whenon,MIDIOUTalsoactsasaMIDITHRU;thatis,itpassesthroughanyMIDImessagesreceivedattheMIDIINjack.
3 Rx MIDI Clock
Determines whether HX Stomp XLrespondstoincomingMIDIbeatclockreceivedatitsMIDIINport,viaUSB,orwhicheveritsensesrst(“Auto”).If
you don’t want HX Stomp XLtorespondtoMIDIclockatall,setthisto“O.”
2
1 Tx MIDI Clock
Determines whether HX Stomp XL transmits MIDI beat clock from its MIDI OUT port, via USB, or both. If you don’t want HX Stomp XL to transmit MIDI
clockatall,setthisto“O.”
2 Tempo Select
Choose whether the tempo is stored and recalled with each snapshot, recalled with each preset, or is applied globally across all presets and
snapshots.
3 BPM
Depending on the Knob 2 (Tempo Select) setting, this Beats Per Minute tempo value is saved per snapshot, per preset, or globally.
3
1 USB MIDI
When on, HX Stomp XL receives and transmits MIDI data via USB in the same capacity as its MIDI jacks.
2 MIDI PC Rx
Determines whether or HX Stomp XL responds to incoming MIDI program change (PC) messages from its MIDI IN port, via USB, or both MIDI and
USB. If you don’t want HX Stomp XLtorespondtoPCmessagesatall,setthisto“O.”
3 MIDI PC Tx
Determines whether HX Stomp XL automatically sends MIDI program change (PC) messages from its MIDI OUT port, via USB, or both MIDI and USB
when selecting presets.
Global Settings > Displays
Knob Parameter Description
1 LED Rings
DetermineswhethertheStompmodefootswitches’coloredLEDringsappeardimwhenbypassed(“Dim/Brt”),orowhenbypassed(“O/Brt”).When
playinginbrightsunlight,youmaywanttosettothisto“O/Brt”toincreasecontrast.
2 Tap LED
Ifyou’dprefernottoseetheredTAPLEDconstantlyashing,youcanturnito.