User Manual
Table Of Contents
- HX Stomp XL 3.0 Owner's Manual
- Welcome to HX Stomp XL
- Quick Start
- Play View
- Edit View
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Bypassing HX Stomp XL Completely
- Choosing a Block’s Model
- Moving Blocks
- Copying/Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Adding a Block to Favorites
- Saving a Model’s Default Settings
- Saving/Naming a Preset
- Creating /Restoring Full Device Backups
- Serial vs. Parallel Routing
- Setting Path B’s Output
- TAP Tempo
- The Tuner
- Dynamic DSP
- Block Order and Stereo Imaging
- The Blocks
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
- Additional Resources
64
Sound
Control
Panel
This button launches the Windows Sound Control Panel, which is
whereyoucanoptionallycongureHX Stomp XL to be the audio
playback device for multimedia applications (such as Windows
Media Player, iTunes, etc.) The settings within the Windows Sound
Control Panel are not relevant for your DAW software since standard
multi-media applications utilize the standard Windows driver.
Default Bit
Depth
Select the Bit Depth at which HX Stomp XL will operate for
recording and playback with your DAW software. 24 bit or 32 bit are
recommended for quality audio production.
ASIO
Buer Size
Your goal is to achieve the lowest latency possible in your DAW
software,butwithglitch-freeaudioperformance.Smallerbuer
size results in lower latency, however, it also increases the demands
on your computer, which can result in clicks, pops, or other audio
artifacts. Start with a lower slider setting here and if you encounter
audio performance issues, come back to this panel and move this
slider to the right incrementally to remedy the problem.
Click the Apply and OK buttons when your HX Stomp XL Control Panel settings are
complete to return to your DAW software. Please also refer to your DAW software’s
documentationformoreaboutitsownspecicaudiodevice,buer,andprojectsettings.