User Manual

66
Synchronizing Tempo via MIDI
Certain Delay and Modulation parameters such as Time and Speed can be represented
withxednumericvalues(msor Hz) ornotevalues(1/4-note,dotted1/8-note, etc.).
When set to note values, the parameter will follow Tap Tempo or incoming MIDI clock.
Press the parameter knob to toggle between ms (or Hz) and note values.
Harmony Delay
FeedbkTime
37%
Key
C1/4
Harmony Delay
FeedbkTime
37%
Key
C750 ms
By default, HX Stomp XL responds to MIDI clock received from external gear (or your
DAW software via USB). HX Stomp XL can also transmit MIDI clock to external gear or
software (transmit is disabled by default). MIDI clock reception (Rx) and transmission
(Tx) can be enabled or disabled from the “Global Settings > MIDI/Tempo” menu.
Inaddition,certainmodulationeectshavedistinctrhythmicelements;forexample,a
tremolo set to a square wave (sometimes called a “slicer”) not only has a tempo but a
beat,wheretheupswingofthewavelandswithrelationtoyoursong.Thatis,theeect
may be in perfect tempo-sync with your song, but its “downbeat” may be shifted ahead
or behind of your drummer’s—or in the studio, your recorded song’s—downbeat.
Press TAP once on the downbeat of your song.
Anybeatsync-based(sometimescalled“LFO”)eectsresetfromthebeginning.
MIDI CC
HX Stomp XLhasreservedspecicMIDICCmessagesforglobalfunctions;theseCCs
cannot be used as controllers. If you attempt to learn a CC message reserved for global
functions (see “Controller Assign”), the following dialog appears:
This CC# is reserved!
Learn
MIDI CC# Value Function
Pedal and Footswitch Assignments
1
0-127 Emulates EXP 1 Pedal
2
0-127 Emulates EXP 2 Pedal
49
0-127 Emulates FS1
50
0-127 Emulates FS2
51
0-127 Emulates FS3
52
0-127 Emulates FS4
53
0-127 Emulates FS5
54
0-127 Emulates FS6
55
0-127 Emulates FS7
56
0-127 Emulates FS8
Looper Controls
60
0-63:Overdub;
64-127: Record
Looper Record/Overdub
61
0-63:Stop;
64-127: Play
Looper Play/Stop
62
64-127 Looper Play Once
63
64-127 Looper Undo/Redo
65
0-63:Forward;
64-127: Reverse
Looper Forward/Reverse
66
0-63:Full;
64-127: Half
Looper Full/Half Speed
Additional Controls
0
n/a Bank MSB (unused, but reserved)
32
n/a Bank LSB (unused, but reserved)
64
64-127 Tap Tempo
68
0-127 Tunerscreenon/o
69
0-3, 8 and 9
Snapshot select (0=Snapshot 1, 1=Snapshot 2,
2=Snapshot 3, 3=Snapshot 4, 8=Next snapshot,
9=Previous snapshot)
70
0-63:Bypass;
64-127: On
All Bypass