User Manual
Table Of Contents
- HX Stomp XL 3.0 Owner's Manual
- Welcome to HX Stomp XL
- Quick Start
- Play View
- Edit View
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Bypassing HX Stomp XL Completely
- Choosing a Block’s Model
- Moving Blocks
- Copying/Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Adding a Block to Favorites
- Saving a Model’s Default Settings
- Saving/Naming a Preset
- Creating /Restoring Full Device Backups
- Serial vs. Parallel Routing
- Setting Path B’s Output
- TAP Tempo
- The Tuner
- Dynamic DSP
- Block Order and Stereo Imaging
- The Blocks
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
- Additional Resources
8
13. SENDS/RETURNS L/R
These 1/4" ins and outs can be used as an FX loop
forinsertingexternalstompboxesbetweenspecicblocksinHX Stomp XL or as
inputs and outputs for running 4-Cable Method rigs—see “HX Stomp XL in 4-Cable
Method”. Alternatively, these L/MONO and RIGHT inputs can act as an always-on
Aux In for monitoring mixers, keyboards, drum machines, or MP3 players. To set
the function of the Return L/R jacks, see “Global Settings > Ins/Outs”
14. INPUT L/MONO, RIGHT Connect your guitar, bass guitar, or mono pedals
to the L/MONO input. Connect stereo pedals, keyboards, synths, or modelers to
both the L/MONO and RIGHT inputs.
15. OUTPUT L/MONO, RIGHT These 1/4" outputs can accommodate
either unbalanced TS cables to connect to your guitar amp or other pedals or
balanced TRS cables to connect to your mixing console or studio monitors. When
connecting to a mono pedal or single amp, connect only the L/MONO 1/4" jack.
16. Phones Out Connectstereoheadphoneshere;turntheVOLUMEknob(11)
to adjust the volume.
IMPORTANT! Always turn the VOLUME knob down before connecting
headphones. Protect your hearing!
“What?!”
I said... ALWAYS TURN THE VOLUME KNOB DOWN BEFORE CONNECTING
HEADPHONES. PROTECT YOUR HEARING!
17. MIDI IN, OUT/THRU Connect HX Stomp XL to your MIDI gear to send
and receive program changes, MIDI clock, continuous controllers, and other MIDI
messages. See “MIDI” for more information.
18. USB HX Stomp XL also functions as a high-quality, multichannel 24-bit/96kHz
USB audio interface for Mac and Windows computers, with DI, re-amping, and
MIDI functionality built right in. Use of a USB 2.0 (or higher) port is required—do
not use an external USB hub. HX Stomp XL can also function as an audio/MIDI
interface for Apple iPad or iPhone mobile devices (with optional Apple Camera
Connection Kit).
19. DC In Line 6 recommends using only the supplied DC-3 power supply. Yes,
we know it’s large, but the HX Stomp XL pedal packs a lot of circuitry into its tiny
housing. To ensure the same signal integrity of Helix
®
, Helix Rack/Control, and
Helix LT devices, we needed a burly power supply.
That said, Line 6 has provided a list of third-party supplies that we’ve tested
with HX Stomp XL, which can be found here: https://line6.com/support/page/kb/
eects-controllers/.
The provided AC adapter serves as the disconnect device.
20. Power Switch Nine out of ten blues dentists agree: HX Stomp XL is more fun
when powered on. The tenth dentist is a nihilist.