User Manual

Footswitch Modes
4•2
Loop FX Mode
When you step on the D footswitch, the JM4’s LCD will display Loop FX Mode. This is
the first of 4 alternate footswitch modes, and if you don’t hit the D footswitch again within
1.5 seconds, Loop FX Mode will remain active. Here are the controls for Loop FX Mode:
No Function – this switch has no function in Loop FX Mode.
No Function – this switch has no function in Loop FX Mode.
1/2 Speed – this switch toggles half speed playback on and off.
Exit – hit this switch to exit Loop FX Mode & return to Jam Control Mode.
Record Select Mode
After you enter Loop FX Mode, as described above, if you step on the D footswitch a
second time within 1.5 seconds, the JM4 will toggle to Record Select Mode. This enables
you to load any of your Recordings and toggle Recording Input Select, as follows:
Next Recording – this switch selects the next Recording in your Recording list.
Previous Recording – this selects the previous Recording in your list.
Input Select – toggles between Guitar or Mic/Aux for your recording input.
Exit – hit this switch to exit Record Select Mode & return to Jam Control Mode.
R
EC SELECT MOD
E
L
OOP FX MOD
E
[A] [B] [C] [D]
EXIT
1/2
SPEED
[A] [B] [C] [D]
REC EXIT
INPUT
SELECT
REC
D
A
B
C
D
A
B
C