User Manual

IMPORTANT! You may change presets while looping, but loop playback will

stop unless the preset you select includes the same type of looper block (mono

or stereo) on the same path (1 or 2) and is assigned to a footswitch.

NOTE: While in Looper mode, stepping on BANK or BANK temporar-

ily enters Preset mode. Once you’ve selected a preset, Helix returns to Looper

mode.

2. To return to the previous mode, press FS6 (EXIT).

Pedal Edit Mode

Mostblockscanbeeditedwithouttakingyourhandsotheguitar;ifyouhatehaving

to reach down and twist knobs, Pedal Edit mode will be your new best friend. Although

Pedal Edit is not intended to replace proper controller assignment, in a pinch, it can

also be used to tweak one parameter at a time during a performance.

1. Hold FS6 (MODE) for two seconds.

Thepreset'sprocessingblocksappearonthefootswitches,ashing:

A/BWhoWatt 100Mystery FilterVolume Pedal

Minotaur

1x12 US Deluxe

Adriatic DelayFX Loop 1/2OctoverbUbiquitous Vibe

EXIT

H O L D T O S A V E + E X I T

MORE...

If the preset has more than ten processing blocks, you may not see the block you

want. Press FS6 (MORE...) one or more times until you do.

NOTE: Selecting a block in Pedal Edit mode has no correlation to any foot-

switch assignment it may have.

2. Press the footswitch displaying the block you want to edit.

Theblock'srstpageofparametersappearatFS1—FS6.

Mod Speed Mod DepthFeedbackTime Mod Phas

EXIT

PAGEBACK VALUE– VALUE+

H O L D T O S A V E + E X I T

2 5 %0 °8 4 %2 0 H z5 0 %5 0 0 m s

If the block has more than one page of parameters, press FS8 (<PAGE) or FS9

(PAGE>) until you nd the parameter.

3. Press the footswitch displaying the parameter you want to ad-

just.

Press and hold a Time or Speed switch to toggle between setting the value in ms

or Hz and note divisions (1/4-note, dotted 1/8-note, etc.).

4. Use the expression pedal to adjust the parameter.

For ne adjustment, press FS10 (VALUE–) and FS11 (VALUE+). Hold FS10

(VALUE–) or FS11 (VALUE +) for faster adjustments.

Toselectadierentblock,press FS7 (BACK).

5. When nished, press FS12 (EXIT).

If you want to save any changes made to the preset, hold FS12 (EXIT) for two

seconds.