User Manual

44
5. Turn Knob 2 (Type) to select "Latching" or "Momentary."
Momentary
The block is bypassed (or enabled, if already bypassed) for as
long as you hold the switch.
Latching
The block is bypassed (or enabled, if already bypassed) every time
you press the switch. This is the default.
NOTE: Footswitch type (momentary or latching) is determined per foot-
switch, not per assignment.
Customizing a Footswitch Label
1. From the Bypass Assign screen, use the joystick to select a
block whose bypass is assigned to a footswitch and press
Knob 6 (Customize).
The Customize screen appears:
16B Dream Rig+Vocals
Cancel Delete Insert
Customize
OK
M
O
P
Q
K
L
Remove Switch LED
Auto Color
No
tu
at La nch
Move the joystick left or right to move the cursor.
Turn the joystick (or move it up/down) to change the selected character.
Press Knob 2 (Delete) to delete the selected character and shift all following
characters to the left.
Press Knob 3 (Insert) to insert a space and shift all following characters to
the right.
SHORTCUT:PressthejoysticktocyclethroughA,a,0,and[SPACE].
Press Knob 4 (Remove) to remove the custom label, after which the foot-
switch label displays its normal assignment. Remove is grayed out until a cus-
tom name is applied.
2. Press Knob 6 (OK).
SHORTCUT: Once any item has been assigned to a footswitch, touch and
hold (but don't press) the footswitch, and a duplicate Customize button ap-
pears above Knob 5.
NOTE: Footswitches can also be customized from the "Command Center"
screen (or Helix editor application!).
Customizing a Footswitch Color
1. From the Customize screen, turn Knob 5 (Switch LED) to select
the desired color (or turn it o).
Normally, you should leave this set to "Auto Color."
2. Press Knob 1 (Cancel) or to exit.
Swapping Footswitches
If you want to change the location of Stomp mode footswitches (especially those
with multiple items assigned or custom labels and LED ring colors), instead of manu-
ally reassigning everything, you can quickly swap all assignments between two foot-
switches.
1. Touch (but don't press) any two Stomp mode footswitches
until the following dialog appears:
OKCancel
Swap all assignments between footswitches 2 and 8?
2. Press Knob 6 (OK).