User Guide

10
Relay G10S Receiver Details
7
7
3
6
8
9
11
10
1 5 42
1. Cable Tone - When an instrument is connected to a pedal or
amp with a cable, the cable alters the sound, depending
on the cable’s length. Cable Tone adds a 10 feet or 30 feet
cable emulation to the sound.
2. Micro USB - Useforrmwareupdatesoroptionalpower.
3. 9V DC Power - Use for primary DC (9V DC / 500mA) power.
4. Instrument Output - Connect to the input of a guitar pedal
oramplier.
5. XLR DI Output - Balanced XLR output for connection to a
mixing desk, audio interface, powered speaker, or similar
with DI level.
6. Channel Selector - With the G10T or G10TII transmitter
docked in the receiver, set to AUTO for automatic channel
selection. Or, with the transmitter docked in the receiver,
settoa channel numbertoselect axedchannel. This
is recommended when several wireless units are in use.
7. Antennas - Diversity antennas receive the RF signal from
the transmitter. Please make sure that the antennas are
not covered.
8. RF LEDs - 3 LEDs indicate the RF signal quality.*
9. Battery LEDs - 3 LEDs indicate the amount of battery life
while the G10T or G10TII is docked or in use.*
*NOTE: Please see “G10S Receiver Information” on page
12 for details regarding the system’s LED states.