User Guide

7
G10TII Transmitter (connected to instrument)
LED State Condition
Green (solid) Transmitting, more than 30 minutes battery time remaining
Red(slowash) Transmitting, less than 30 minutes battery time remaining
O
Connected to an instrument but not enough remaining battery power to transmit
‖
or removed from
instrument
* When the G10TII is docked in a receiver or Relay-Ready device, the G10TII LED initially indicates amber, red, or green,
dependingonitscurrentbatterystate.Thisisfollowedbyfourashes(red)asthedeviceinitializes.Oncethiscompletes,the
G10TII LED proceeds to indicate its remaining battery time.
†
All values stated for amount of battery time remaining are approximate, and the exact amount of battery time remaining
whenanLEDstate isindicated mayvary slightlybetween charges. Whenthe G10TIIashes red,itmayhaveupto60
minutes of battery time remaining.
‡
IftheG10TIIreachesafullcharge(solidgreen)andremainsdocked,theG10TIILEDmayeventuallyashgreenagain.This
isexpectedbehaviorastheG10TIImaydischargeslightlyafterreachingafullcharge,anditsLEDmaythenashgreenuntil
it again reaches a full charge.
§
If the lockout indication continues for over 10 minutes, please stop charging and try again in a cooler environment condition.
‖
WhentheG10TIIhasinsucientpowertotransmit,itsLEDmayindicateapatternofvequickredasheswhenconnected
to an instrument and audio is detected. This is the expected behavior.