User Guide

Table Of Contents

Relay G10 Receiver Details

1. Micro USB – Use for primary DC (5V DC /1A) power and

rmwareupdates.

2. Output A – ¼" unbalanced, full performance output

intended to drive a guitar/bass amplier, stomp box, or

multi-eectsinput.

3. Output B – XLR balanced, full performance output intended

to connect to a mixing console, PA system, audio

interface, or similar.

4. LED Halo – Multicolor LED halo displays the status for the

transmitter battery and radio. The halo illuminates white

when receiving a good radio signal from a G10T or G10TII

transmitter. The halo pulses red when the transmitter's

battery is below 30 minutes of operating time. A white

pulsing halo indicates that no signal is received from the

transmitter.*

5. Transmitter Input – Plug in the transmitter here for charging

and channel selection.

*NOTE: Please also see “G10 Receiver Information” on

page 9 for details regarding the system's LED states.