User Manual

Setup Examples
10•17
Setup Tips
In this section we’ll describe a few general setup tips you might find useful when
configuring your M20d.
Applying Auto Trim to Inputs:
In Setup Mode, tap the Auto Trim button in the Main Toolbar, then select the channels
you’d like to Auto Trim. Sing and play at performance level. Auto Trim will set optimal
levels for those channels. Tap the Confirm Changes button to save the new trim levels.
Trim Tracking:
When a channel’s input is too hot, enter Deep Tweak Mode, tap the Input tab, then
engage Trim Tracking to avoid distortion without changing the channel’s overall volume.
Encoder Assign:
Tap the Encoder Assign button in the Main Toolbar to toggle encoder modes for the
currently selected channel. The modes are Level, Pan, Trim and the 4 Global FX.
Auditioning Channel Presets:
Select a channel, enter Tweak Mode, then tap the Folder icon in the Toolbar to the
right of the Channel Level Meter. This opens the Load Preset browser, where you can
load various Channel Presets that are appropriate to the current channel type.
Changing Channel DSP Preset Types:
In Tweak Mode, tap the Channel Icon in the upper left corner of the Toolbar to open
the Edit Preset Properties browser. Tap the blue button in the lower right corner of the
browser to select various Preset DSP Types (see Appendix C for more details).
Copy/Paste Channel Settings:
When you’ve tweaked a channel to your liking, such as a vocal channel, and you’d like to
use the same settings for 1 or 2 more vocal channels, drag the channel’s stage icon to the
Stage Icon Gallery to save it as a new Preset, then drag the new preset from the Icon
Gallery to the stage to duplicate the original channel’s settings.
Applying Feedback Suppression To A Vocal Mic:
Select the vocal mic channel then enter Tweak Mode. Tap the Deep Tweak button
then select the Input tab. Tap the FBS Enable button and set the FBS Mode to Vocal.
Have the singer sing at performance level. FBS will automatically detect the troublesome
frequency and filter out the feedback. Repeat steps for other channels.