User Manual

Setup Mode

2•1

Setup MOde

When you ﬁrst power up your StageScape M20d, you will need to set up your inputs,

outputs and channel assignments in Setup Mode.

The M20d will power up in Setup Mode, or you can enter Setup Mode at any time by

pressing the hardware SETUP button. The touchscreen will display the Stage View, the

Stage Icon Gallery, the Controller Strips, and the Main Toolbar, which includes the

Setups button, Encoder Assign button, Auto Trim button, I/O Panel and Info button.

Below is an illustration of the M20d touchscreen in Setup Mode, with one XLR

microphone connected to Input #1.

SETUP

Creating Input Channels

There are 3 main ways to create Input Channels and conﬁgure your outputs and channel

assignments: Physical Connections, the Stage Icon Gallery and Setups.