User Manual

Preset DSP Types
C•1
preSet dSp typeS
A Preset DSP Type is essentially a universal channel preset of various processing blocks
arranged in a particular order in the channel’s signal chain. Each preset is designed with
a specific DSP Type, but the DSP Type can be changed if desired. For example, one Preset
DSP Type may include FBS (Feedback Suppression), High Pass Filter, Noise Gate, EQ
6-Band and Comp, and a similar DSP Type may change the processing block order by
placing the Comp in front of the EQ 6-Band.
To load a particular Preset DSP Type, follow these steps:
1. Enter Setup Mode by pressing the hardware SETUP button.
2. Tap the stage icon for the Channel Preset you’d like to edit; in this example, we’ll use
the “Female Lead” preset. Its stage icon should now be highlighted.
3. Enter Tweak Mode by pressing the hardware TWEAK button.
4. Tap the Deep Tweak button in the Tweak window if it isn’t already selected.
5. Tap the image of the Female Lead vocal in the upper left of the display. The Edit Preset
Properties window will appear, as illustrated below.
SETUP
TWEAK