User Manual

Setup Mode
2•2
Using Physical Connections
Plug in the various cables to connect your mic and line inputs, mains and monitor speakers.
The M20d will sense an XLR or 1/4 inch jack has been plugged in, and a graphic connector
will be displayed on the I/O Panel for each jack, indicating a valid connection.
A default Stage Icon will appear on the stage for each connected input, and a Controller
Strip will automatically be assigned to it. When all your gear has been plugged in, the
stage will be populated with various default stage icons associated with the physical gear
you have connected.
Below is an illustration of a Duo setup with 2 mics, a PC, line inputs, monitors and mains.
The next step when connecting your gear in this way would be to customize your stage
icons and channel presets to match your physical gear.
See Chapter 10: Setup Examples for more details on setting up your gear using
physical connections, using the above Duo setup as an example.