User Manual

Setup Mode
2•3
Using The Stage Icon Gallery
Instead of plugging in your gear first, you can create various input channels using the Stage
Icon Gallery, which is the horizontal strip of icons displayed just above the controller
strips. Swipe the gallery left or right to reveal all the icons, including the More folder.
See the Channel Presets section on Page 2•12 for more detail on Preset customization.
For each input channel you’d like to create, tap or drag an icon from the Stage Icon
Gallery, or tap an icon to replace a selected icon image. The stage icon will be placed on
the stage, and a controller strip will automatically be assigned to it. The channel will be
loaded with a default Channel Preset, and if there is no physical input connection yet for
the selected icon, the associated input graphic on the I/O Panel will be colored dim amber.
Above is an example of a stage setup created entirely by using the Stage Icon Gallery, with
only one XLR cable plugged in for the Female Vocal in channel #1. Inputs 2 through 8 on
the I/O Panel are colored dim amber, as are the monitor and mains jacks.
The next step when configuring your setup in this way would be to plug in the various
cables to connect your gear as depicted on the M20d stage, at which time their I/O Panel
connectors will be colored green.