User Manual

Setup Mode
2•5
Customizing Stage Icons
When you’d like to change the appearance of a stage icon and retain its channel settings,
this is easily accomplished by using the Edit Selection button in the Main Toolbar.
For example, let’s say you have a Kick drum stage icon and you’d like it to represent a full
drum set. First tap the Kick stage icon to select it.
swap the physical connections of inputs 1 and 4, but that may prove to be impractical in a
critical live performance scenario.
In a situation like this the M20d provides I/O Reassignment, using the touchscreen UI.
This feature is also accessible remotely using the free StageScape Remote app for iPad®.
To reassign jacks in Setup Mode using the virtual I/O Panel, follow these steps:
1. Select the Stage Icon for the input assignment you wish to reassign.
2. Tap the I/O Panel in the Main Toolbar to zoom in on it.
3. The selected Stage Icon’s current input jack will be highlighted.
4. Tap the input jack to which you wish to assign the selected Stage Icon.
5. The selected Stage Icon’s input jack is now the jack you tapped in Step 4.
Note: only presets with the 1/4” badge can be swapped or assigned to Inputs 13-16.
Tip : If you tap an input jack to which another channel is already assigned, the
inputs of that channel and the currently selected channel will be swapped.
Tip : You can also reassign outputs for Monitors A-D using this operation.
Then tap the Edit Selection Icon in the Main Toolbar.