User Manual

Setup Mode
2•14
To add a new icon to the Stage View from the Preset Library dialog:
1. Select a preset category using the Category menu located in the top-right of the
dialog.
2. Select a preset from the preset list in the right side of the dialog.
3. Tap Add To Stage.
You will observe that the dialog is dismissed and the Stage Icon for the selected preset
appears on the stage.
To replace a Stage Icon’s preset from the Preset Library dialog:
1. In the Stage View, select the Stage Icon whose preset you wish to replace.
2. Select a preset category using the Category menu located in the top-right of the
dialog.
3. Select a preset from the preset list in the right side of the dialog.
4. Tap Load Selected.
Observe that the dialog is dismissed and the selected Stage Icon’s channel preset is
replaced.
Tip : Note that the M20d retains the channel’s image and name if you had modified
the image or name prior to selecting a new preset.
Include Master FX
When loading a new preset, the M20d provides the option of including the preset’s Master
FX settings. This is useful for loading Channel Presets that were designed with specific
Master FX settings in place, such as “Female w/Reverb” and “Male Doubled”.
To include Master FX replacing a Stage Icon’s preset from the Preset Library dialog:
1. Enable the Include Master FX option
2. Select a preset from the preset list
3. Tap Load Selected
Important: Be aware that Master FX are global,
meaning their settings affect all channels using
Master FX.