User Manual

Tweak Mode
3•12
I.Monitor Settings
When you tap the Monitors tab in Deep Tweak mode, the Monitor settings are displayed.
1. Monitor Icon: displays the stage icon for the connected monitor.
2. Tweak Button: click Tweak to display the Tweak view for the selected Monitor. See
the illustrations on the next page for visual details. In Quick Tweak mode, the Tone
XY interface is displayed. In Deep Tweak mode, you can fine tune the processors
selectable in the left row of processor tabs, similar to tweaking an input channel.
3. Linked/Unlinked Button: sets the monitor mode to Linked or Unlinked. Linked
is Post-fader: when you adjust the channel level up or down, the monitor level is
adjusted up or down accordingly. Unlinked is Pre-fader: when you adjust channel
level up or down, it has no effect on monitor level.
4. Output Level: adjusts the output level of the selected monitor, using the associated
M20d hardware encoder in the top row of the front panel.
5. Send Level: adjusts the level of the channel’s audio that is sent to the selected
monitor, using the associated M20d hardware encoder in the bottom row of the
front panel.