User Manual

Record Mode
4•2
Quick Capture
Using Quick Capture you can record up to 20 seconds of live audio to the M20d’s internal
memory. As a visual cue that you’re in Quick Capture mode, the Record button appears
with a 00.20 indicator. All tracks are recorded when you tap the Record button, so no
track arming is required.
Press Play and your recorded tracks play back through the channels you have set up on
your M20d. Since the tracks are recorded unprocessed, you can adjust channel settings as
you listen back. Playback will loop continuously until you press Stop.
Quick Capture is useful for recording a live sound check, for example. It enables you
to listen to your recorded mix and adjust mix settings as needed. And when using the
StageScape Remote app with an iPad®, you can listen to your mix from various locations
around the room. The recorded audio is replaced each time you press Record.
Quick Capture In Tweak Mode
In addition to Record Mode, where Quick Capture is available only when no SD or
USB media is inserted, Quick Capture is always available in Tweak Mode.
For example, if you’re adjusting EQ settings for a Vocal channel in Tweak Mode, you can
instantly capture the vocalist’s live audio by tapping the Quick Capture Record button
in the upper right of the display.
See the Tweak Mode chapter for more info on Quick Capture in Tweak Mode.