User Manual

M20d Monitor Mode
5•4
FX Monitor Levels
In Monitor Mode, you can also route audio from any of the 4 global FX to your monitors.
To do so, tap the FX To Mons button located in the upper left of the Main Toolbar. The
4 global FX controller strips will appear, as illustrated below.
Now follow the same 3 basic steps previously outlined for Channel Monitor Levels:
1. Select the target monitor on stage by tapping it.
2. Set the source effect’s Linked/Unlinked mode as desired by tapping its button.
3. Turn the source effect’s assigned encoder to the desired monitor level.
As you turn each effect’s hardware encoder, which will be color-coded purple, you’ll see
the animated signal flow from the source effect to the target monitor, as illustrated in the
above screenshot for FX A.