User Manual

Perform Mode
6•2
You still have access to the Info View in the Main Toolbar, from which you can select
Help, Footswitch Assign, L6 LINK Device Management and System Settings. And
you still have the ability to select Channels, Stage Icons, the Mains Meter and Media
Player if you’d like to edit your selection in Tweak Mode.
To save a Scene, tap the Scenes button. The Save & Load Scenes window will open. If
no Scene has yet been saved, tap the Save button and you’ll be able to name the current
Scene. After typing in the Scene name, tap the Enter button and your Scene will be
saved for future recall.
Tip: tap and hold any Controller Strip for a few seconds - it will turn grey, indicating
you can then drag it to rearrange its order (its assigned encoder will track it).
Saving & Loading Scenes
The Scenes button is located in the upper left corner of the Main Toolbar in Perform
Mode, replacing the Setups button featured in Setup Mode. A Scene is essentially a
snapshot of all your settings within the current Setup. These include settings for processor
and FX parameters, channel levels, mute, solo, pan position and monitor level. There is
no limit to the number of Scenes you can store within a Setup.