User Manual

Perform Mode
6•4
Input channel, which have no Trim controls. In this case, the Media Player and Aux
Input controller strips would default to Channel Level.
Mute & Solo
To toggle the Mute/Unmute state for any channel, tap the Mute button on its controller
strip. Tap Show Solo Buttons in the Main Toolbar to convert the Mute buttons to
Solo buttons. Tap the Clear Solo button to defeat Solo, and tap Hide Solo Buttons to
toggle the Solo buttons on the controller strips back to Mute buttons.
Encoder Assignments
Once a Scene is loaded, or if you’re using the current settings as your default Scene, you’ll
be in mix mode. During a live performance you’ll most likely be tweaking encoder levels.
The M20d makes it easy to switch encoder assignments, giving you quick access to the
following via the Encoder Assign button in the Main Toolbar:
• Channel Level
• Channel Pan
• Channel Trim
• Global FXA Send Level
• Global FXB Send Level
• Global FXC Send Level
• Global FXD Send Level
Tap the Encoder Assign button and this drop down menu
will appear. Select the desired assignment for the channel
you’re working on and the encoder for that channel will
instanly control the parameter you’ve selected.
Switch to another assignment for any channel and adjust its
level using the same encoder. All channels will follow the
current encoder assignment. In other words, if Pan Position
is selected, all encoders will control Pan Position for their
assigned channels. The exception would be for channels
for which a particular assignment is not applicable.
An example would be the Media Player or the stereo Aux