User Manual

System Settings
9•2
About
The About page provides:
• System Version information
• Copyright and Trademark disclaimers
• Show Welcome Screen At Startup option (via checkbox)
The System Version of your M20d references the currently installed firmware version.
You should keep your system updated to the latest available firmware version, available at
http://www.line6.com. Please see Update M20d for information on updating your system
firmware.
Wi-Fi Remote Setup
M20d’s Wi-Fi support allows you to connect one or more iPad® devices simultaneously, for
complete remote control over all M20d mixer functions via the StageScape Remote app,
which is available for free from the iTunes App Store. Each iPad® can control different
screens or different parameters independently of the touchscreen on the M20d itself.
A USB Wi-Fi adaptor is required, to be connected to the M20d’s USB port. Recommended
adaptorsincludetheEnGeniusEUB9801,LinkSysAE1000andSamsungWIS10ABGN.
It is also possible to use Apple’s USB to Ethernet adapter (available worldwide from Apple)
and a WiFi Ethernet router.
Configuring M20d for remote control is easy. Just follow these steps:
1. Connect a USB Wi-Fi Device to the M20d
This is the most important step. A USB Wi-Fi device must be plugged
into the M20d’s USB port to enable the StageScape Remote app to
connect with the M20d.