User Manual

System Settings
9•8
4. Select the speaker you wish to update (this can be done at any time prior to applying
the firmware update).
5. Tap the button labeled “Locate Firmware File” and select the update file from the file
browser dialog, then press OK.
6. The selected file’s firmware version information will be displayed on-screen. Confirm
that you have selected the desired firmware version, then tap the button labeled “Update”.
A progress bar at the bottom of the screen will indicate the firmware update progress,
which can take several minutes.
Important: Do not power off the M20d or L6 Link-connected speakers, nor disconnect any
cables during the update process.
Update L6 Link
The Update L6 Link tab enables you to update the firmware of L-Series speakers through
your StageScape M20d. An L6 Link or 110 ohm cable is required for making the connection.
To update your L-Series firmware, follow these steps:
1. Download the latest L-Series Speaker firmware update file from http://www.line6.com.
2. Copy the downloaded update file onto a USB storage device or SD Card and insert it
into the M20d.
3. Connect the L-Series speakers to your M20d via L6 Link (L6 Link connected speakers
are listed on the right side of the screen).