User Manual

Setup Examples
10•2
Stage Setup (Duo)
To begin, set up the guitar amp and mic, keyboards, vocal mics, laptop and powered
monitors on the venue stage as usual. Add the left and right PA speakers (unless using the
house PA) and plug everything into the M20d I/O Panel as follows:
• Dynamic mic for the guitar amp into Mic/Line Input 1 (XLR).
• Stereo keyboards out into Mic/Line Inputs 3 and 4 (1/4 inch).
• Dynamic mics for vocals into Mic/Line Inputs 5 and 6 (XLR).
• Laptop stereo out into Aux In stereo jack.
• Stage monitors into Monitor Outs A and B.
• Stereo PA speakers into Main Outs Left and Right.
With all your gear connected, power up the M20d (it will default to Setup Mode).
Your stage view should look something like this.
SETUP