User Manual

Setup Examples
10•7
Now connect all your gear to the M20d I/O Panel as follows:
• Drum mics into Mic Inputs 1 through 4 (4 mic icons appear on the stage, plus 4 mic
controller strips).
• Bass direct box 1/4 inch out into Input 5 (1 line icon appears on the stage, plus 1
line controller strip).
• Keyboards 1/4 inch mono out into Input 6 (1 line icon appears on the stage, plus 1
line controller strip).
• Vocal mic XLRs into Inputs 7 and 8 (2 mic icons appear on the stage, plus 2 mic
controller strips).
• Dynamicmicfor the guitaramp(XLR)intoInput9 (1miciconappearsonthe
stage, plus 1 mic controller strip).
• The 3 floor monitors connect to Monitor Outs A, B and C (3 monitor icons appear
on the stage, plus 3 monitor controller strips).
• Main speakers connect to Main Outs Left and Right.
Since we’re using 2 condenser mics for the drums (hihat and overhead toms/cymbals),
we’ll need phantom power. To turn it on, tap the M20d I/O Panel graphic - it will zoom
to a larger view.
Tap the top row’s “48v” button - it will highlight amber - this provides phantom power to
the top row mics, which include Inputs 3 & 4 for the hihat and overhead mics.
Now let’s create Input Channels for all our instruments and mics. We’ll remain in Setup
Mode for the process.
SETUP