User Manual

Setup Examples
10•10
In this window you can easily change channel 7’s icon
and name as follows:
Tap the Icon image - the Select New Icon Image
browser will open. Select the generic Mic icon, replacing
the Male Lead image, then tap the OK button.
Now tap the Name field (Male Lead) and the Rename
keyboard window will pop up. Type Vocal Guitar as
the new channel name, then tap Enter.
To dismiss the Edit Preset Properties window, tap the
small channel icon in the Main Toolbar (to the left of
the Rename keyboard icon).
Repeat the above steps for Channel 8, loading the Male
Vocal preset, renaming it Vocal Bass, and replacing its
stage icon with a generic mic image.
To complete our stage setup, we’ll assign a Guitar Combo preset to Channel 8, the mic
for the guitar amp. Select the Mic (8) icon by tapping it, then scroll the Stage Icon
Gallery until you see the Guitar Combo preset icon.
Tap the Guitar Combo icon and it will replace the Mic (8) stage icon, loading the Guitar
Combo preset into channel 8 and renaming it accordingly.
As a final step, arrange all your stage icons to reflect your live band’s setup, similar to what
we’ve done in the illustration on Page 6. Now you’re ready to tweak your mix setup.