User Manual

Setup Examples
10•15
• Scroll down until you see the Laptop image then select it. Tap OK and the Laptop
image will replace the Line 3 image on the stage. Repeat this process for the Line
4 stage icon.
You should now have 3 Laptop icon images on stage, similar to the illustration on Page
11. Rename them Laptop 1-2, Laptop 3 and Laptop 4 by tapping the Rename keyboard
button in the Main Toolbar for each icon and typing in their new names.
M20d Setup (Electronic - Phase 2)
To finish setting up our gear, connect the following to the M20d hardware I/O Panel:
• Drum machine 1/4 inch mono output into M20d Combi Input 5 (1 Line stage icon
will appear on the stage, along with a Line controller strip).
• Vocal mic XLR into Input 6 (1 Mic stage icon will appear on the stage, along with
a Mic controller strip).
• FX processor 1/4 inch returns plug into Inputs 7 and 8 (2 Line stage icons will appear
on the stage, along with 2 Line controller strips).
• The FX processor mono input plugs into M20d Monitor Outs D via XLR cable (1
Line stage icon will appear on the stage).
To customize the drum machine stage icon, select the Line (5) stage icon by tapping it,
then tap the Edit Selection button to the left of the Rename keyboard button in the
Main Toolbar.
Follow the same procedure outlined on Page 14, this time selecting the Drums category
and scrolling until you see the Drum Machine image. Select the Drum Machine image
then tap the blue OK button.
The Drum Machine icon will replace the Line (5) icon on the stage.