User manual

1. Audio LED - Green LED = Audio Signal

2. Battery LED

•Blue LED = Full Charge

•Solid Red LED = Low Charge

•Flashing Red LED = Very Low Charge

3. Power - Slide switch to turn on/off transmitter.

4. Channel Select - Align transmitter and reciever channels.

5. Input

6. Battery Installation - Open the side door to access the battery

compartment. The inside of the battery compartment door indicates

the correct battery direction. For best results use only non-rechargeable

alkalinebatteries.

7. Power Supply - To turn on the receiver, plug the Line 6 DC-1 power

supplyintothereceiver’s9VDCinputjack.

1 2

Basic OperatiOn