Datasheet

LTM4611
8
4611fb
For more information www.linear.com/LTM4611
V
OSNS
+
(J12) (+): Input to the Remote Sense Amplifier.
This pin connects to the output remote sense point. The
remote sense amplifier is used for V
OUT
≤ 3.7V. For V
OUT
> 3.7V, tie V
OSNS
+
to GND to rail the output of the remote
sense amplifier.
V
OSNS
–
(M12) (–): Input to the Remote Sense Amplifier.
This pin connects to the ground remote sense point. The
remote sense amplifier is used for V
OUT
≤ 3.7 V. For V
OUT
>
3.7V, tie V
OSNS
–
to INTV
CC
to rail the output of the remote
sense amplifier.
pin FuncTions
DIFFV
OUT
(K12): Output of the Remote Sense Amplifier.
This pin connects to the V
OUT_LCL
pin for remote sense
applications. Otherwise float when not used.
MTP1:A12, MTP2:B11, MTP3:C10, MTP4:C11, MTP5:
C12, MTP6:D10, MTP7:D11, MTP8:D12, MTP9:E12:
Extra mounting pads used for increased solder integrity
strength. Leave electrically open circuit.