Quad Precision Op Amp (LT1014)
Dual Precision Op Amp (LT1013)
1014 is the ﬁrst precision quad operational ampliﬁer
which directly upgrades designs in the industry standard
14-pin DIP LM324/LM348/OP-11/4156 pin conﬁguration.
It is no longer necessary to compromise speciﬁcations,
while saving board space and cost, as compared to single
The LT1014’s low offset voltage of 50µV, drift of 0.3µV/°C,
offset current of 0.15nA, gain of 8 million, common mode
rejection of 117dB and power supply rejection of 120dB
qualify it as four truly precision operational ampliﬁers.
Particularly important is the low offset voltage, since no
offset null terminals are provided in the quad conﬁguration.
Although supply current is only 350µA per ampliﬁer, a new
output stage design sources and sinks in excess of 20mA
of load current, while retaining high voltage gain.
Similarly, the LT1013 is the ﬁrst precision dual op amp in the
8-pin industry standard conﬁguration, upgrading the per-
formance of such popular devices as the MC1458/MC1558,
LM158 and OP-221. The LT1013’s speciﬁcations are similar
to (even somewhat better than) the LT1014’s.
Both the LT1013 and LT1014 can be operated off a single
5V power supply: input common mode range includes
ground; the output can also swing to within a few millivolts
of ground. Crossover distortion, so apparent on previous
single-supply designs, is eliminated. A full set of speciﬁca-
tions is provided with ±15V and single 5V supplies.
Single Supply Operation
Input Voltage Range Extends to Ground
Output Swings to Ground While Sinking Current
Pin Compatible to 1458 and 324 with Precision Specs
Guaranteed Offset Voltage: 150µV Max
Guaranteed Low Drift: 2µV/°C Max
Guaranteed Offset Current: 0.8nA Max
Guaranteed High Gain
5mA Load Current: 1.5 Million Min
17mA Load Current: 0.8 Million Min
Guaranteed Low Supply Current: 500µA Max
Low Voltage Noise, 0.1Hz to 10Hz: 0.55µV
Low Current Noise—Better than 0P-07, 0.07pA/√Hz
Battery-Powered Precision Instrumentation
Strain Gauge Signal Conditioners
4mA to 20mA Current Loop Transmitters
Multiple Limit Threshold Detection
Multiple Gain Blocks
USE TYPE K THERMOCOUPLES. ALL RESISTORS = 1% FILM.
COLD JUNCTION COMPENSATION ACCURATE
TO ±1°C FROM 0°C TO 60°C.
USE 4TH AMPLIFIER FOR OUTPUT C.
LT1014 Distribution of Offset Voltage
3-Channel Thermocouple Thermometer
INPUT OFFSET VOLTAGE (µV)
–300 0 200
NUMBER OF UNITS
(1700 OP AMPS)
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.