Datasheet

LT1964
12
1964f
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone]
●
FAX: [phone]
●
www.linear.com  LINEAR TECHNOLOGY CORPORATION 2001
LT/TP 0502 2K • PRINTED IN USA
RELATED PARTS
PACKAGE DESCRIPTIO
U
PART NUMBER DESCRIPTION COMMENTS
LT1120 125mA Micropower Low Dropout Regulator with Includes 2.5V Reference and Comparator, V
IN
= 3.5V to 36V,
Comparator and Shutdown I
Q
= 40µA, N8 Package
LT1121 150mA Micropower Low Dropout Regulator V
IN
= 4.2V to 30V, I
Q
= 30µA; ThinSOT, S8 and MS8 Packages
LT1129 700mA Micropower Low Dropout Regulator V
IN
= 4.5V to 30V, I
Q
= 50µA; DD and S8 Packages
LT1175 800mA Negative Low Dropout Micropower Regulator V
IN
= 4.5V to 20V, I
Q
= 45µA, 0.26V Dropout Voltage, S8 and
ThinSOT Packages
LT1611 Inverting 1.4MHz Switching Regulator –5V at 150mA from 5V Input, ThinSOT Package
LT1761 Series 100mA, Low Noise, Low Dropout Micropower Regulators V
IN
= 1.5V to 20V, I
Q
=20µA, 20µV
RMS
Noise, ThinSOT Package
LT1762 Series 150mA, Low Noise, LDO Micropower Regulators V
IN
= 1.5V to 20V, I
Q
=25µA, 20µV
RMS
Noise, MS8 Package
LT1763 Series 500mA, Low Noise, LDO Micropower Regulators V
IN
= 1.5V to 20V, I
Q
=30µA, 20µV
RMS
Noise, S8 Package
LT1764A 3A, Low Noise, Fast Transient Response LDO V
IN
= 1.5V to 20V, 40µV
RMS
Noise; DD and T5 Packages
LT1931/LT1931A Inverting 1.2MHz/2.2MHz Switching Regulators –5V at 350mA from 5V Input, ThinSOT Package
LT1962 300mA, Low Noise, LDO Micropower Regulator V
IN
= 1.5V to 20V, I
Q
=30µA, 20µV
RMS
Noise, MS8 Package
LT1963A 1.5A, Low Noise, Fast Transient Response LDO V
IN
= 1.5V to 20V, 40µV
RMS
Noise; DD, T5, S8 and ThinSOT
Packages
1.50 – 1.75
(NOTE 4)
2.80 BSC
0.30 – 0.45 TYP
5 PLCS (NOTE 3)
DATUM ‘A’
0.09 – 0.20
(NOTE 3)
S5 TSOT-23 0302
PIN ONE
2.90 BSC
(NOTE 4)
0.95 BSC
1.90 BSC
0.80 – 0.90
1.00 MAX
0.01 – 0.10
0.20 BSC
0.30 – 0.50 REF
NOTE:
1. DIMENSIONS ARE IN MILLIMETERS
2. DRAWING NOT TO SCALE
3. DIMENSIONS ARE INCLUSIVE OF PLATING
4. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR
5. MOLD FLASH SHALL NOT EXCEED 0.254mm
6. JEDEC PACKAGE REFERENCE IS MO-193
3.85 MAX
0.62
MAX
0.95
REF
RECOMMENDED SOLDER PAD LAYOUT
PER IPC CALCULATOR
1.4 MIN
2.62 REF
1.22 REF
S5 Package
5-Lead Plastic TSOT-23
(Reference LTC DWG # 05-08-1635)