Quick Start Manual

INSTALLATION OPTOEYE
Required Tools:
2. Plug sensors into flexible adapters
1. Mount photo eye at the door/ gate
opening
3. Wire photo eyes to the operator
and connect to the monitored
interface
4. Align transmitter and receiver by
adjusting angle and height of the
fixture
Height adjustment (first
loosen wing nut)
Angle adjustment
Utilize LED’s for alignment and trouble-
shooting.
Red ON Not aligned
Red OFF Aligned
Green ON Power connected
Green OFF No power
Receiver
Transmitter
ATTENTION!
Coded
Sensors
Doo
r Openin
g
Page 2/4
Issue Date: 21-June-2010