Quick Start Manual

WARNING
To reduce the risk of injury or death to persons
1) READ AND FOLLOW ALL INSTRUCTIONS
2) Disconnect power supply before attempting installation
3) For use with a Class 2 supply +6V DC to +40V DC
4) For use as entrapment protection device on doors or gates
5) Refer to door or gate operator manual for details of accurate connection to the
operator
6) OPTOEYE photo eyes are to be placed at the bottom of the opening no more
than 6 inches (doors)/ 27.5 inches (gates) from the ground
7) OPTOEDGE safety edges are to be placed where risk of entrapment or
obstruction exists, such as the bottom edge of a vertically closing edge
8) SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
FRABA Inc.
1800 E State Street, Suite 148, Hamilton NJ 08609
Phone [phone], Fax [phone]
www.vitector.com, [e-mail]
Issue Date: 21-June-2010
Description
The OPTOEDGE and OPTOEYE are
entrapment protection devices to
safeguard doors or gates acc. to the
requirements of UL325. The same
optical sensors are used for both
systems: for the photo eye OPTOEYE
and the sensing edge OPTOEDGE.
Technical Data
Power Consumption max. 50 mA
Supply Voltage 6 to 40V DC
Operation Temp. -13°F to 165°F
Range:
Safety Edge 30 ft.
Photo Eye 45 ft.