Owner's Manual

PRINTER’S INSTRUCTIONS:
GUIDE,USER,DMC-10 - LINEAR P/N: 227596 A - INK: PMS REFLEX BLUE & BLACK - MATERIAL: 80 LB. WHITE COATED COVER - SIZE: 8.500” X 5.500” - SCALE: 1-1 - SIDE 2 OF 2
DMC-10 Intercom System User’s Guide
Intercom Features and Special Modes
Intercom Features
Volume Control
Volume at each station can
be set with its VOL button.
Each momentary VOL
↑
press
increases, or VOL
↓
press
decreases, the station’s
volume. Pressing and holding
the VOL
↓
button for one second
will silence the stations speaker
(VOL button stays lit). Pressing
and holding the VOL
↑
button for
one second returns the volume
to its previous level.
Hands-free Reply
Room stations will automatically
listen to all other room and
patio stations for 25 seconds
after the room station’s TALK
button is released (except for
stations in Privacy Mute Mode
or Do-not-disturb Mode).
This allows for a “hands-free”
reply from the person being
called. This also applies when
communicating with door
stations using the room or
patio station’s DOOR button.
Quick Listen
To momentarily listen to all of
the room and patio stations
without making a call, press
and hold the room station’s
LISTEN button. This mode
WILL NOT listen to stations
in Privacy Mute Mode or
Do-not-disturb Mode.
Privacy Modes
Privacy Mute Mode
For privacy, room and patio
stations can be set to prevent
monitoring from other
stations.
To enter or exit Privacy Mute
Mode, momentarily press
the station’s MUTE button. In
Privacy Mute Mode the MUTE
button lights.
Regular intercom operation
still functions in Privacy Mute
Mode.
Do-not-disturb Mode
For privacy and silence, room
and patio stations can be set
to prevent monitoring and
calling from other stations.
To se lec t Do-not-disturb Mode,
press and hold the station’s
MUTE button for two seconds.
In Do-not-disturb Mode the
MUTE and VOL buttons light.
To exit Do-not-disturb Mode,
press the MUTE button again.
The station can still
perform regular intercom
communications if the call
is made from the station in
Do-not-disturb Mode.
Constant Modes
Monitor Mode
Monitor Mode is typically
used for monitoring a baby or
other sounds in a room. When
a room or patio station is set
to Monitor Mode, the station’s
microphone is always on. Set
other stations to Listen Mode
(see below) to hear sounds
from any station(s) set to
Monitor Mode.
To enter or exit Monitor Mode,
press the station’s MUTE and
TALK buttons together. In
Monitor Mode the TALK button
lights.
Listen Mode
When a room or patio station is
set to Listen Mode, the station’s
speaker is always on. Set a
station to Listen Mode to hear all
stations set to Monitor Mode.
Also, if the optional audio input
wall plate has been installed,
set a station to Listen Mode to
hear audio from the wall plate.
To enter or exit Listen Mode,
press the station’s MUTE and
LISTEN buttons together (on
patio stations, press MUTE and
VOL
↑
buttons together). In Listen
Mode the LISTE N button lights.
Regular intercom operation
still functions in Monitor Mode
and Listen Mode.
Copyright © 2007 Linear LLC 227596 A
VOL
PRESS VOL FOR ONE
SECOND TO SILENCE
SPEAKER
PRESS VOL
FOR ONE
SECOND TO
RESET
VOLUME
RELEASE THE TALK
BUTTON TO LISTEN
HANDS-FREE
REPLY LASTS
25 SECONDS
PRESS AND HOLD THE
LISTEN BUTTON TO
MONITOR ALL
OTHER
STATIONS
LISTEN
PRESS THE MUTE
BUTTON TO ENTER
OR EXIT
PRIVACY MUTE
MODE
OTHER
STATIONS CAN
NOT MONITOR
MUTE
PRESS THE MUTE BUTTON
FOR TWO SECONDS TO
ENTER OR EXIT
DO-NOT-DISTURB
MODE
OTHER
STATIONS CAN
NOT MONITOR
OR CALL
MUTE
PRESS THE TALK
BUTTON WHILE
SPEAKING
TALK
PRESS MUTE AND TALK
TO ENTER OR
EXIT MONITOR
MODE
TALK
MUTE
PRESS MUTE AND
LISTEN TO ENTER
OR EXIT
LISTEN MODE
LISTEN
MUTE
PRESS MUTE AND VOL
TO ENTER OR
EXIT LISTEN
MODE ON
A PATIO
STATION
VOL
MUTE